Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
CLICK TO SUBMIT AN INQUIRY
2022 High quality Epoxy Resin Manufacturers - Transparent Epoxy Resin Clear Room Temperature Cure and Low Viscosity – Dujiang
The pretty loaded projects management experiences and one to a person support model make the high importance of business enterprise communication and our easy understanding of your expectations for resin vinyl ester, 15mm Carbon Fiber Tube, ptfe coated fiberglass cloth, Please sense no cost to speak to us anytime. We are going to reply you when we receive your inquiries. Remember to note that samples are available before we start our business enterprise.
2022 High quality Epoxy Resin Manufacturers - Transparent Epoxy Resin Clear Room Temperature Cure and Low Viscosity – Dujiang Detail:
Applications:
Suitable for general casting products with variable thickness.
Properties:
Low viscosity
Excellent transparency
Room temperature cure
Recommended process:
Casting
| Basic Data | |||
| Resin |
GE-7502A |
Standard |
|
| Aspect | Colourless transparent viscous liquid |
- |
|
| Viscosity at 25℃ [mPa·s] |
1,400-1,800 |
GB/T 22314-2008 |
|
| Density [g/cm3] |
1.10-1.20 |
GB/T 15223-2008 |
|
| Epoxide Value [eq/100 g] |
0.53-0.59 |
GB/T 4612-2008 |
|
| Hardener |
GE-7502B |
Standard |
|
| Aspect | Colourless transparent liquid |
- |
|
| Viscosity at 25℃ [mPa·s] |
8-15 |
GB/T 22314-2008 |
|
| Amine Value [mg KOH/g] |
400-500 |
WAMTIQ01-018 |
|
|
Processing Data |
|||
| Mix Ratio | Resin ：Hardener |
Ratio by weight |
Ratio by volume |
| GE-7502A : GE-7502B |
3:1 |
100:37-38 |
|
| Initial Mix Viscosity | GE-7502A : GE-7502B |
Standard |
|
| [mPa·s] |
25℃ |
230 |
WAMTIQ01-003 |
| Pot Life | GE-7502A : GE-7502B |
Standard |
|
| [min] |
25℃ |
180-210 |
WAMTIQ01-004 |
| Glass transitiontemperature Tg [℃] | GE-7502A : GE-7502B |
Standard |
|
| 60 °C × 3 h + 80 °C × 3 h |
≥60 |
GB/T 19466.2-2004 |
|
|
Recommended Curing Condition: |
||
| Thickness | First cure | Post cure |
| ≤ 10 mm | 25 °C × 24 h or 60 °C × 3 h | 80 °C × 2 h |
| > 10 mm | 25 °C × 24 h | 80 °C × 2 h |
| Properties of Casting Resin | |||
| Curing condition | 60 °C × 3 h + 80 °C × 3 h |
Standard |
|
| Product type | GE-7502A/GE-7502B |
- |
|
| Flexural strength [MPa] |
115 |
GB/T 2567-2008 |
|
| Flexural modulus [MPa] |
3456 |
GB/T 2567-2008 |
|
| Compressive strength [MPa] |
87 |
GB/T 2567-2008 |
|
| Compressive modulus [MPa] |
2120 |
GB/T 2567-2008 |
|
| Hardness Shore D |
80 |
||
| Package | |||
| Resin | IBC Ton barrel: 1100kg/ea;Steel Drum: 200kg/ea; Buckle Bucket: 50kg/ea; | ||
| Hardener | IBC Ton barrel: 900kg/ea;Steel Drum: 200kg/ea; Plastic Bucket: 20kg/ea; | ||
| Note： | Customized package is available | ||
|
Instructions |
| To Check whether there is crystallization in GE-7502A agent before using it. If there is crystallization, measures should be taken as following:It should not to be used until the crystallization totally dissolve and the baking temperature is 80℃. |
|
Storage |
| 1. GE-7502A maybe crystallize at low temperature. |
| 2. Do not expose under sunlight and store in clean, cool and dry place. |
| 3. Sealed immediately after use. |
| 4. Recommended product shelf life – 12 months. |
| Handling Precautions | |
|
Personal Protection Equipmen |
1. Wear protection gloves to avoid direct contact with skin. |
|
Respiratory Protection |
2. No special protection. |
|
Eyes Protection |
3. Chemical anti-spattering goggles and face guard are recommended. |
|
Body Protection |
4. Use a protection coat which can be resisted, protection shoes, gloves, coat and emergency shower equipment according to situations. |
| First aid | |
| Skin | Wash with warm soap water for at least 5 minutes or the contaminant removed. |
|
Eyes |
|
|
Inhalation |
|
Important notice:
The data contained in this publication are based on tests in specific condition by Wells Advanced Materials (Shanghai) Co., Ltd. In view of the many factors that may affect processing and applications of our products, these data DO NOT relieve processors from carrying out their own investigations and tests. Nothing herein is to be construed as a warranty. It is the responsibility of the user to determine the applicability of such information and recommendations and the suitability of any product for its own particular purposes.
Product detail pictures:
Related Product Guide:
With our leading technology also as our spirit of innovation,mutual cooperation, benefits and development, we are going to build a prosperous future jointly with your esteemed company for 2022 High quality Epoxy Resin Manufacturers - Transparent Epoxy Resin Clear Room Temperature Cure and Low Viscosity – Dujiang , The product will supply to all over the world, such as: Vietnam, Algeria, Auckland, Our solutions have national accreditation standards for experienced, premium quality goods, affordable value, was welcomed by people around the globe. Our products will continue to increase in the order and look forward to cooperation with you, Truly must any of people goods be of interest to you, make sure you letus know. We're likely to be delighted to give you a quotation up on receipt of one's in depth specs.
By Joanna from Niger - 2017.03.07 13:42
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
By Michelle from United Arab emirates - 2018.06.28 19:27
-
High Quality 100gsm Fiberglass Cloth - Fibergl...
-
Big discounting Silicone Rubber Coated Fibergla...
-
Fast delivery Fiberglass Mesh Fabric - Fibergl...
-
Hot New Products Biaxial Fibreglass Cloth - Ac...
-
Reasonable price for Fiberglass Cloth Fire Resi...
-
Good Quality Fiberglass Woven Rovin - Direct R...
