China Fiberglass Chopped Strands Manufacturers and Suppliers factory and manufacturers

4.5mm Length Chopped Strand E-Glass Fiber for PP/PA/PE

short description:

E-Glass Fiberglass Chopped strand was the main raw material for Gypsum Board, Concrete Reinforcement, Cement Reinforcement, and other Concrete/Gypsum Products. Fiberglass Chopped Strand is the new product for environmental protection property. It was widely used in the field of the Construction Industry.
Fiberglass Chopped Strand was treated by silane coupling agent, which makes it has excellent dispersity and composition with other inorganic materials and resin for actual use.

MOQ:10 tons

Send email to us

Product Detail

Product Tags

We not only will try our best to offer superb solutions to every single shopper, but also are ready to receive any suggestion offered by our prospects for 4.5mm Length Chopped Strand E-Glass Fiber for PP/PA/PE, We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term mutual benefits.
We not only will try our best to offer superb solutions to every single shopper, but also are ready to receive any suggestion offered by our prospects for China Fiberglass Chopped Strand and Fiberglass for Thermoplastic, Providing the best merchandise, the most perfect service with the most reasonable prices are our principles. We also welcome OEM and ODM orders.Dedicated to strict quality control and thoughtful customer service, we’ve been always available to discuss your requirements and ensure full customer satisfaction. We sincerely welcome friends to come negotiate business and start cooperation.

PROPERTY

•To prevent crack of GRC components
•Good Integrity and no static electricity
•Low Fuzz
•Excellent integrated with cement
•Good filament flexible and magnificent strands distribution cement
•Endued good physical and chemical properties for GRC
•Disperse Fast
•Low Dosages
•Harmless

Application

Applying for Fiberglass Reinforced Cement/Concrete

Usage Instruction:

(1)Pre-mixed Fiberglass Chopped Strand

Properties:
It has excellent properties with alkali resistance, stiffness, bundle–state, and aging–proof, Mixed for 20 minutes in cement at 50rpm, it can still keep a good bundle state, and it won’t be dispersed to the filament.

Purpose:

It is a high-integrity Glass Fiber Chopped Strand designed for use in the reinforcement of concrete, renders, and mortars. It may be added to conventional mixes either on site or by prepending with other dry mix components. The low–tex strands permit efficient reinforcement at low dosages. They are particularly suited to the modification of standard concrete mixes for floor screeds and slabs,and for the preparation of prebagged mixes of special mortars and renders.

(2) Water-dispersed Fiberglass Chopped Strands

Properties:
E-glass Glassfiber Applied with water–dispersed size, the strands will disperse well to filaments in water in 10 seconds, and also disperse fast, usage amount less, enlarge strength.

Purpose:
It is typically used at a low level of addition to prevent cracking and improve the performance of ready mix concrete, floor screeds, renders or the special mortar mixes.it can be used for surface crack–proof of GRC
products.

TO USE:
–Mix your resin and hardener, or catalyst
–Next add your Fiberglass Chopped Strands
–It is best to use a paint mixer on your power drill to ensure that all of the strands are properly saturated Thick layers and large pour areas can create excessive heat, so proceed with caution.

STORAGE

Fiberglass Chopped Strand should place under dryness conditions and shall no be open the covering membrane until applying

CAUTION

Dry powder materials can build up static charges, Proper precautions must be taken in the presence of flammable liquids

WARNING

Fiberglass Chopped Strand can cause eye irritation, harmful if inhaled, may cause skin irritation, harmful if swallowed.Avoid contact with eyes, and contact with skin, Wear goggles and face shield when handing. Always wear an approved respirator. Use only with adequate ventilation. Keep away from heat. Spark and flame. Store handle and use in a manner that minimizes dust generation

FIRST AID

In case of contact with skin, wash with warm water and soap. For eyes immediately flush with water for 15 minutes. If irritation continues seek medical attention. If inhaled, move to a fresh air environment. If you have breathing difficulties seek immediate medical attention

ATTENTION

Container may be hazardous when empty—empty containers container product residue.

Key Technical Data:

CS	Glass Type	Chopped Length(mm)	Diameter(um)	MOL(%)
CS3	E-glass	3	7-13	10-20±0.2
CS4.5	E-glass	4.5	7-13	10-20±0.2
CS6	E-glass	6	7-13	10-20±0.2
CS9	E-glass	9	7-13	10-20±0.2
CS12	E-glass	12	7-13	10-20±0.2
CS25	E-glass	25	7-13	10-20±0.2

chopped strands

Fiberglass chopped strands We not only will try our best to offer superb solutions to every single shopper but also are ready to receive any suggestion offered by our prospects for a Reasonable price for 4.5mm Length Chopped Strand E-Glass Fiber for PP/PA/PE, We sincerely welcome friends from all over the world to cooperate with us on the basis of long-term mutual benefits.
Reasonable prices for China Fiberglass Chopped Strand and Fiberglass for Thermoplastic, Providing the best merchandise, and the most perfect service with the most reasonable prices are our principles. We also welcome OEM and ODM orders. Dedicated to strict quality control and thoughtful customer service, we’ve been always available to discuss your requirements and ensure full customer satisfaction. We sincerely welcome friends to come to negotiate business and start cooperation.