China Fiberglass Chopped Strands Mat Manufacturers and Suppliers factory and manufacturers

450 GSM E-Glass Fiber Glass Roll Fiberglass Mat Chopped Strand Mat for Boat

short description:

E-Glass Chopped Strand Mat is made of Alkali-free Fiberglass Chopped Strands, which are randomly distributed and bonded together with a polyester binder in powder or emulsion form. The mats are compatible with unsaturated polyester, vinyl ester, and other various resins. It’s mainly used in hand lay-up, filament winding, and compression molding processes. The typical FRP products are panels, tanks, boats, pipes, cooling towers, automobile interior ceilings, a complete set of sanitary equipment, etc.

MOQ:10 tons

Send email to us

Product Detail

Product Tags

Sticking to the principle of “Super Quality, Satisfactory service” ,We are striving to be a good business partner of you for 450 GSM E-Glass Fiber Glass Roll Fiberglass Mat Chopped Strand Mat for Boat, Any interest, make sure you come to feel totally free to contact us. We are looking ahead to forming effective business associations with new customers across the globe in the near long run.
Sticking to the principle of “Super Quality, Satisfactory service” ,We are striving to be a good business partner of you for China Fiberglass Chopped Strand Mat and Fiberglass Mat, Our solutions are widely recognized and trusted by users and can meet continuously changing of economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!

Applications and Requirements

1. Hand lay-up: Hand lay-up is the main method of FRP production. Fiberglass chopped strand mats, continuous mats, and stitched mats can all be used in hand lay-ups. The use of a stitch-bonded mat can reduce the number of layers and improve the efficiency of hand lay-up operations. However, because the stitch-bonded mat contains more chemical fiber stitchbonding threads, the bubbles are not easy to drive away, the fiberglass products have many needle-shaped bubbles, and the surface feels rough and not smooth. In addition, the stitched mat is a heavy fabric, and the mold coverage is shorter than that of the cut mat and the continuous mat. When making products with complex shapes, it is easy to form voids at the bend. The hand lay-up process requires the mat to have the characteristics of fast resin infiltration rate, easy elimination of air bubbles, and good mold coverage.

2. Pultrusion: The pultrusion process is one of the main uses of continuous felt and stitched mats. Generally, it is used in combination with untwisted roving. Using continuous mat and stitched mat as pultruded products can significantly improve the hoop and transverse strength of the products and prevent the products from cracking. The pultrusion process requires the mat to have uniform fiber distribution, high tensile strength, fast resin infiltration rate, good flexibility and mold filling, and the mat should have a certain continuous length.

3.RTM: Resin transfer molding (RTM) is a closed mold molding process. It is composed of two half-moulds, a female mold and a male mold, a pressurizing pump and an injection gun, without a press. The RTM process typically uses continuous and stitch-bonded mats rather than chopped strand mats. The mat sheet is required to have the characteristics that the mat sheet should be easily saturated with resin, good air permeability, good resin scour resistance and good overmoldability.

4.Winding process: chopped strand mats and continuous mats are generally used for winding and forming resin-rich layers mainly used for products, including inner lining layers and outer surface layers. The requirements for the glass fiber mat in the winding process are basically similar to those in the hand lay-up method.

5.Centrifugal casting molding: chopped strand mat is usually used as raw material. The chopped strand mat is pre-laid in the mold, and then the resin is added into the rotating open mold cavity, and the air bubbles are discharged by centrifugation to make the product dense. The mat sheet is required to have the characteristics of easy penetration and good air permeability.

Our fiberglass mats are of several types: fiberglass surface mats, fiberglass chopped strand mats, and continuous fiberglass mats. The chopped strand mat is divided into emulsion and powder glass fiber mats.

INSTRUCTION

E-Glass Chopped Strand Mat Emulsion
			Quality Index-1040
			225G	300G	450G
Test Item	Criterion According	Unit	Standard	Standard	Standard
GLASS TYPE	G/T 17470-2007	%	R₂O<0.8%	R₂O<0.8%	R₂O<0.8%
COUPLING AGENT	G/T 17470-2007	%	SILANE	SILANE	SILANE
Area Weight	GB/T 9914.3	g/m2	225±45	300±60	450±90
Loi Content	GB/T 9914.2	%	1.5-12	1.5-8.5	1.5-8.5
Tension Strength CD	GB/T 6006.2	N	≥40	≥40	≥40
Tension Strength MD	GB/T 6006.2	N	≥40	≥40	≥40
Water Content	GB/T 9914.1	%	≤0.5	≤0.5	≤0.5
Permeation Rate	G/T 17470	s	<250	<250	<250
Width	G/T 17470	mm	±5	±5	±5
Bending strength	G/T 17470	MPa	Standard ≧123	Standard ≧123	Standard ≧123
Bending strength	G/T 17470	MPa	Wet ≧103	Wet ≧103	Wet ≧103
Test Condition
Ambient Temperature（℃）		10	Ambient Humidity(%)

We have many types of fiberglass roving: panel roving, spray up roving, SMC roving, direct roving,c glass roving, and fiberglass roving for chopping.Sticking to the principle of “Super Quality, Satisfactory service”, We are striving to be a good business partner for you for Hot-selling 450 GSM E-Glass Fiber Glass Roll Fiberglass Mat Chopped Strand Mat for Boat, Any interest, make sure you come to feel totally free to contact us. We are looking ahead to forming effective business associations with new customers across the globe in the near long run.
Hot-selling China Fiberglass Chopped Strand Mat and Fiberglass Mat, Our solutions are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!