Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
CLICK TO SUBMIT AN INQUIRY
Best-Selling High Strength Fiberglass Woven Roving - E-Glass Chopped Strand Mat Emulsion – Dujiang
From the past few years, our firm absorbed and digested sophisticated technologies equally at home and abroad. Meanwhile, our organization staffs a group of experts devoted into the growth of Ptfe Fiberglass Cloth, carbon fiber fabric price, reinforce fiberglass tube, Our hugely specialized process eliminates the component failure and offers our consumers unvarying high quality, allowing us to control cost, plan capacity and maintain consistent on time delivery.
Best-Selling High Strength Fiberglass Woven Roving - E-Glass Chopped Strand Mat Emulsion – Dujiang Detail:
Applications and Requirements
1.Hand lay-up: Hand lay-up is the main method of FRP production. Fiberglass chopped strand mats, continuous mats and stitched mats can all be used in hand lay-up. The use of stitch-bonded mat can reduce the number of layers and improve the efficiency of hand lay-up operations. However, because the stitchbonded mat contains more chemical fiber stitchbonding threads, the bubbles are not easy to drive away, and the fiberglass products have many needle-shaped bubbles, and the surface feels rough and not smooth. In addition, the stitched mat is a heavy fabric, and the mold coverage is shorter than that of the cut mat and the continuous mat. When making products with complex shapes, it is easy to form voids at the bend. The hand lay-up process requires the mat to have the characteristics of fast resin infiltration rate, easy elimination of air bubbles and good mold coverage.
2.Pultrusion: The pultrusion process is one of the main uses of continuous felt and stitched felt. Generally, it is used in combination with untwisted roving. Using continuous mat and stitched mat as pultruded products can significantly improve the hoop and transverse strength of the products and prevent the products from cracking. The pultrusion process requires the mat to have uniform fiber distribution, high tensile strength, fast resin infiltration rate, good flexibility and mold filling, and the mat should have a certain continuous length.
3.RTM: Resin transfer molding (RTM) is a closed mold molding process. It is composed of two half-moulds, a female mold and a male mold, a pressurizing pump and an injection gun, without a press. The RTM process typically uses continuous and stitch-bonded mats rather than chopped strand mats. The mat sheet is required to have the characteristics that the mat sheet should be easily saturated with resin, good air permeability, good resin scour resistance and good overmoldability.
4.Winding process: chopped strand mats and continuous mats are generally used for winding and forming resin-rich layers mainly used for products, including inner lining layers and outer surface layers. The requirements for the glass fiber mat in the winding process are basically similar to those in the hand lay-up method.
5.Centrifugal casting molding: chopped strand mat is usually used as raw material. The chopped strand mat is pre-laid in the mold, and then the resin is added into the rotating open mold cavity, and the air bubbles are discharged by centrifugation to make the product dense. The mat sheet is required to have the characteristics of easy penetration and good air permeability.
INSTRUCTION
|
E-Glass Chopped Strand Mat Emulsion |
|||||
|
Quality Index-1040 |
|||||
|
225G |
300G |
450G |
|||
|
Test Item |
Criterion According |
Unit |
Standard |
Standard |
Standard |
|
GLASS TYPE |
G/T 17470-2007 |
% |
R2O<0.8% |
R2O<0.8% |
R2O<0.8% |
|
COUPLING AGENT |
G/T 17470-2007 |
% |
SILANE |
SILANE |
SILANE |
|
Area Weight |
GB/T 9914.3 |
g/m2 |
225±45 |
300±60 |
450±90 |
|
Loi Content |
GB/T 9914.2 |
% |
1.5-12 |
1.5-8.5 |
1.5-8.5 |
|
Tension Strength CD |
GB/T 6006.2 |
N |
≥40 |
≥40 |
≥40 |
|
Tension Strength MD |
GB/T 6006.2 |
N |
≥40 |
≥40 |
≥40 |
|
Water Content |
GB/T 9914.1 |
% |
≤0.5 |
≤0.5 |
≤0.5 |
|
Permeation Rate |
G/T 17470 |
s |
<250 |
<250 |
<250 |
|
Width |
G/T 17470 |
mm |
±5 |
±5 |
±5 |
|
Bending strength |
G/T 17470 |
MPa |
Standard ≧123 |
Standard ≧123 |
Standard ≧123 |
|
Wet ≧103 |
Wet ≧103 |
Wet ≧103 |
|||
|
Test Condition |
|||||
|
Ambent Temperature（℃） |
10 |
Ambient Humidity(%) |
|||
INSTRUCTION
Product detail pictures:
Related Product Guide:
Bear "Customer initially, High quality first" in mind, we do the job closely with our customers and supply them with efficient and skilled providers for Best-Selling High Strength Fiberglass Woven Roving - E-Glass Chopped Strand Mat Emulsion – Dujiang , The product will supply to all over the world, such as: United Arab Emirates, Macedonia, Bahamas, With the best technological support, we have tailored our website for the best user experience and kept in mind your ease of shopping. we ensure that the best reaches you at your doorstep, in the shortest possible time and with the help of our efficient logistical partners i.e DHL and UPS. We promise quality, living by the motto of promising only what we can deliver.
By Daphne from Jordan - 2018.11.04 10:32
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Frances from Serbia - 2018.05.13 17:00
-
China Cheap price Epoxy Resin Crystal Clear - ...
-
China Supplier 3k Plain Weave Carbon Fiber Clot...
-
Fiberglass Mesh Tape Fiberglass Self Adhesive T...
-
Wholesale Price China E-Glass Ecr Fiberglass Ro...
-
Factory directly Unidirectional Fiberglass Fabr...
-
Factory best selling Fire Resistant Glass Fiber...
