Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
● Easier workability, good air drying.
● Shorter gel-to-cure interval, reduced stress cracking,
● The resin’s improved reactivity properties often permit an increase in the lay-up thickness per session.
● Higher elongation provides FRP equipment with increased toughness
● Lighter color makes defects easier to see and correct while the resin is still workable.
● Longer shelf life provides additional flexibility to fabricators in storage and handling.
Applications and Fabrication Techniques
● FRP storage tanks, vessels, ducts, and on-site maintenance projects, particularly in chemical processing and pulp and paper operations.
● The resin is designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression molding and resin transfer molding techniques, pultrusion and molded grating applications.
● When properly formulated and cured, complies with FDA regulation 21 CFR 177.2420, covering materials intended for repeated use in contact with food.
● Lloyds’ approved in the name of 711
Typical Liquid Resin Properties
Property (1) | Value |
Appearance | Light yellow |
Viscosity cPs 25℃ Brookfield #63@60rpm | 250-450 |
Styrene Content | 42-48% |
Shelf Life (2), Dark, 25℃ | 10 months |
(1)Typical property values only, not to be construed as specifications
(2)Unopened drum with no additives, promoters, accelerators, etc. added. Shelf life specified from date of manufacture.
Typical Properties (1) Resin Clear Casting (3)
Property | Value | Test Method |
Tensile Strength / MPa | 80-95 | |
Tensile Modulus / GPa | 3.2-3.7 | ASTM D-638 |
Elongation at break / % | 5.0-6.0 | |
Flexural Strength / MPa | 120-150 | |
ASTM D-790 | ||
Flexural Modulus / GPa | 3.3-3.8 | |
HDT (4) ℃ | 100-106 | ASTM D-648Method A |
Barcol Hardness | 38-42 | Barcol 934-1 |
(3)Cure schedule: 24 hours at room temperature; 2 hours at 120C
(4)Maximum stress: 1.8 MPa
Safety and Handling Consideration
This resin contains ingredients which could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.
The specification is 2011 edition and may change with the technological improvement. Sino Polymer Co., Ltd. maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.
Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using our products in your facilities.
Recommended Storage:
Drums – Store at temperatures below 25℃. Storage life decreases with increasing storage temperature. Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoid contamination of product with water, do not store outdoors. Keep sealed to prevent moisture
pick-up and monomer loss. Rotate stock.
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.