China Vinyl Ester factory and manufacturers

Epoxy Vinyl Ester Resin and Adhesion Factory Promotional Thickenable of Glass Fibers

short description:

HCM-1 Vinyl Ester Glass Flake Mortar is a series of special scale high temperature and corrosion resistant materials developed for flue gas desulfurization (FGD) devices.
It is made of phenolic epoxy vinyl ester resin with high corrosion resistance, high temperature resistance and high toughness as the film-forming material, added with special surface treatment flake materials and related additives, and processed with other corrosion-resistant pigments. The final material is Mushy.

Send email to us

Product Detail

Product Tags

We consistently carry out our spirit of ”Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for Epoxy Vinyl Ester Resin and Adhesion Factory Promotional Thickenable of Glass Fibers, We believe we will become a leader in developing and producing high quality products in both Chinese and international markets. We hope to cooperate with more friends for mutual benefits.
We consistently carry out our spirit of ”Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for China Epoxy Resin and Fiberglass Resin, We put the product quality and customer’s benefits to the first place. Our experienced salesmen supply prompt and efficient service. Quality control group make sure the best quality. We believe quality comes from detail. If you have demand, allow us to work together to get success.

PROPERTY

• It has a unique anti-permeation barrier, strong anti-permeability, and low corrosive gas permeability.
•Good resistance to water, acid, alkali and some other special chemical media, and outstanding resistance to solvent media.
• Small hardening shrinkage, strong adhesion to various substrates, and easy partial repair.
• High toughness, good mechanical properties, adapt to sudden temperature changes.
•100% cross-linked curing, high surface hardness, good corrosion resistance.
• Recommended maximum operating temperature: 140°C in wet state and 180°C in dry state.

APPLICATION

• Lining of steel structures and concrete structures (structures) under harsh environmental conditions such as power plants, smelters, and fertilizer plants.
• Protection of the internal and external surfaces of equipment, pipelines, and storage tanks with liquid medium below medium corrosion strength.
• It is more effective when used in combination with glass fiber reinforced plastic (FRP), such as high-speed metal impeller.
• Sulfuric acid and desulfurization environment and equipment such as power plants, smelters, and fertilizer plants.
• Marine equipment, harsh environment with alternate corrosion of gas, liquid and solid three phases.

QUALITY INDEX

Note: HCM‐1 Vinyl Ester Glass Flake Mortar meets the requirements of HG/T 3797‐2005.

Item		HCM‐1D （Base coat）	HCM‐1 （Mortar）	HCM‐1M （Surface coat）	HCM‐1NM (Anti-wear coat）
Appearance		purple / red liquid	natural color /gray paste	Gray/green liquid	Gray/green liquid
proportion，g/cm3		1.05~1.15	1.3~1.4	1.2~1.3	1.2~1.3
G gel time （25℃）	surface dry，h	≤1	≤2	≤1	≤1
G gel time （25℃）	Real dry，h	≤12	≤24	≤24	≤24
Re- coat time，h		24	24	24	24
heat stability ，h（80℃）		≥24	≥24	≥24	≥24

MECHANICAL PROPERTY OF CASTING

Item	HCM‐1D（Base coat）	HCM‐1（Mortar）	HCM‐1M（Surface coat）	HCM‐1NM（Anti-wear coat）
Tensile strength，MPa	≥60	≥30	≥55	≥55
Flexural Strength，MPa	≥100	≥55	≥90	≥90
Adhesion,MPa	≥8（steel plate） ≥3（concrete）
Wear resistance，mg	≤100			≤30
Heat resistance	40 times cycle

MEMO: The data is the typical physical properties of fully cured resin castings and should not be regarded as product specifications.

TECHNOLOGICAL PARAMETER

A Group	B Group	Matching
HCM‐1D（Base coat）	Curing agent	100：（1~3）
HCM‐1（Mortar）		100：（1~3）
HCM‐1M（Surface coat）		100：（1~3）
HCM‐1NM（Anti-wear coat）		100：（1~3）

MEMO: The dosage of B component can be adjusted in the above ratio according to environmental conditions

PACKING AND STORAGE

• This product is packaged in a clean, dry container, Net weight: A component 20Kg/barrel, B component 25Kg/barrel (The actual construction is based on the ratio of A:B=100: (1~3) to prepare construction materials, and can be adjusted appropriately according to the construction environmental conditions)
• The storage environment should be cool, dry, and ventilated. It should be protected from direct sunlight and isolated from fire. The storage period below 25°C is two months. Improper storage or transportation conditions will shorten the storage period.
• Transportation requirements: from May to the end of October, it is recommended to transport by refrigerated trucks. Unconditional transportation should be carried out at night to avoid sunshine hours.

NOTE

• Consult our company for construction methods and processes.
• The construction environment should maintain air circulation with the outside world. When constructing in a place with no air circulation, please take forced ventilation measures.
• Before the coating film is completely dry, avoid friction, impact and contamination by rain or other liquids.
• This product has been adjusted to the appropriate viscosity before leaving the factory, and no thinner should be added arbitrarily. Please consult our company if necessary.
• Due to the great changes in coating construction, application environment and coating design factors, and we are unable to understand and control the construction behavior of users, our company’s responsibility is limited to the quality of the coating product itself. the user is responsible for the applicability of the product in the specific use environment.

We consistently carry out our spirit of ”Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for Factory Promotional Thickenable Epoxy Vinyl Ester Resin and Adhesion of Glass Fibers, and Improve The Mechanical Strength of Laminates, We believe we will become a leader in developing and producing high-quality products in both Chinese and international markets. We hope to cooperate with more friends for mutual benefit.
Factory Promotional China Epoxy Resin and Fiberglass Resin, We put product quality and customer benefits in first place. Our experienced salesmen supply prompt and efficient service. Quality control group makes sure the best quality. We believe quality comes from detail. If you have a demand, allow us to work together to get success.

Previous: Reinforced Fiberglass Wall Insulation Mesh 75gr 1X50m Fiberglass Net

Next: High Quality 4800tex ECR Glass Direct Roving for Filament Winding

China Epoxy Resin and Fiberglass Resin