China Factory directly supply Fiberglass Staple Fiber - Solid Fiberglass Rebar Frp Flexible – Dujiang factory and manufacturers

Factory directly supply Fiberglass Staple Fiber - Solid Fiberglass Rebar Frp Flexible – Dujiang

short description:

Product Detail

Product Tags

Feedback (2)

The client satisfaction is our primary concentrate on. We uphold a consistent level of professionalism, top quality, credibility and service for fiberglass chopped strand mat, Fiberglass Mesh 180g, honeycomb carbon fiber cloth, Welcome all nice buyers communicate details of products and ideas with us!!

Factory directly supply Fiberglass Staple Fiber - Solid Fiberglass Rebar Frp Flexible – Dujiang Detail:

PROPERTY

•High corrosion resistance:The fiberglass used by the rebar is a durable material, and they are molded through the composite process. The life span is up to 100 years. They can be used as permanent support materials.
•A high tensile strength:The load is approximately double that of a steel bar with the same diameter
•Low weight:The weight is only 1/4 that of a steel bar with the same diameter, therefore, the labor intensity is greatly reduced, and the transportation cost is reduced at the same time.
•Anti-static:It has no electrical conductivity, and no sparks will be produced when being cut, it’s particularly suitable for high gas zones.
• Non-flammable:It’s non-flammable and has high thermal isolation.
•Cuttability:It avoids damages to cutter heads and does not delay excavation.
•Save cost:Use this material as reinforcing bars for roads and bridges, could reduce secondary repair costs.

APPLICATION

Construction, transportation industry, coal mine tunnel, parking structures, half coal roadway, slope support, subway tunnel, rock surface anchoring, sea wall, dam, etc.
•Tunnels and culverts
•Mine tunnel
•Civil Engineering
•Seawall dock
•Military Engineering
•Roads and Bridges
•Airport Runway
•Mountain slope support
•Formwork and reinforced concrete work

Technical Index of GFRP Rebar

Diameter (mm)	Cross Section (mm2)	Density (g/cm3)	Weight (g/m)	Ultimate Tensile Strength (MPa)	Elastic Modulus (GPa)
3	7	2.2	18	1900	>40
4	12	2.2	32	1500	>40
6	28	2.2	51	1280	>40
8	50	2.2	98	1080	>40
10	73	2.2	150	980	>40
12	103	2.1	210	870	>40
14	134	2.1	275	764	>40
16	180	2.1	388	752	>40
18	248	2.1	485	744	>40
20	278	2.1	570	716	>40
22	355	2.1	700	695	>40
25	478	2.1	970	675	>40
28	590	2.1	1195	702	>40
30	671	2.1	1350	637	>40
32	740	2.1	1520	626	>40
34	857	2.1	1800	595	>40
36	961	2.1	2044	575	>40
40	1190	2.1	2380	509	>40

PACKING AND STORAGE

• Carbon fiber fabric could be produced into different lengths,each tube is wound on a suitable cardboard tubes
with inside diameter of 100mm,then put into a polyethylene bag,
• Fastened the bag entrance and packed into a suitable cardboard box.Upon to customer’s request,this product could be shipped either with carton packaging only or with packaging,
• Shipping: by sea or by air
• Delivery Detail:15-20 days after receive the advance payment

Product detail pictures:

Related Product Guide:

As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for Factory directly supply Fiberglass Staple Fiber - Solid Fiberglass Rebar Frp Flexible – Dujiang , The product will supply to all over the world, such as: Georgia, Romania, Romania, We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.

5mm*5mm Fiberglass Mesh