Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
CLICK TO SUBMIT AN INQUIRY
Factory Outlets Matt Fiberglass - Glass Fiber Panel Roving Assembled Fiberglass – Dujiang
Our target is always to satisfy our customers by offering golden support, superior value and high quality for 2400tex Fiberglass Direct Roving, Pultruded Carbon Tube, 160gsm Twill Fiberglass Fabrics, Our concept would be to assist presenting the confidence of each prospective buyers while using the offering of our most honest service, as well as right merchandise.
Factory Outlets Matt Fiberglass - Glass Fiber Panel Roving Assembled Fiberglass – Dujiang Detail:
528S is mainly used to make transparent sheets and transparent felt sheets. The board has the characteristics of lightweight material, high strength, good impact resistance, no white silk, and high light transmittance.
Continuous Panel Molding Process
resin mix is uniformly deposited in a controlled amount onto a moving film at aconstant speed. The thickness of the resin is controlled by the draw-knife. Fiberglass roving is chopped and uniformly distributed onto the resin. Then a top film is applied forming a sandwich structure. The wet assembly travels through a curing oven to form the composite panel.
Product Specification
| Model | E3-2400-528s |
| Type of Size | Silane |
| Size Code | E3-2400-528s |
| Linear Density (tex) | 2400TEX |
| Filament Diameter (μm) | 13 |
| Linear Density (%) | Moisture Content | Size Content (%) | Breakage Strength |
| ISO 1889 | ISO3344 | ISO1887 | ISO3375 |
| ± 5 | ≤ 0.15 | 0.55 ± 0. 15 | 120 ± 20 |
End-Use Markets
(Building and Construction / Automotive /Agriculture/Fibreglass Reinforced Polyester)
STORAGE
• Unless otherwise specified, the fiberglass products should be stored in a dry,cool and moisture-proof area.
• The fiberglass products should remain in their original package until prior to use. The room temperature and humidity should be always maintained at – 10℃~35℃ and ≤80% respectively.
• To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high.
• When the pallets are stacked in 2 or 3 layers, special care should be taken to correctly and smoothly move the top pallets
Product detail pictures:
Related Product Guide:
Which has a positive and progressive attitude to customer's desire, our corporation constantly improves our merchandise quality to satisfy the desires of consumers and further focuses on safety, reliability, environmental demands, and innovation of Factory Outlets Matt Fiberglass - Glass Fiber Panel Roving Assembled Fiberglass – Dujiang , The product will supply to all over the world, such as: Swiss, Salt Lake City, Bulgaria, With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in this field and other industries. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success! We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
By Emma from Lahore - 2018.09.16 11:31
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Sandra from Borussia Dortmund - 2018.06.03 10:17
