Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
CLICK TO SUBMIT AN INQUIRY
Featured
Chongqing Dujiang Composites Co., Ltd. A fibreglass manufacturer of chopped fiberglass mat、fiberglass roving、fiberglass mesh、fiberglass woven roving and so on. is one of good fiberglass material suppliers. We have a fiberglass factory located in Sichuan. Among the many excellent glass fiber manufacturers, there are only a few fiberglass roving manufacturers that are really doing well, CQDJ is one of them.We are not only fiber raw material supplier, but also supplier fiberglass.We have been doing fiberglass wholesale for more than 40 years.We are very familiar with fiberglass manufacturers and fibreglass suppliers all over China.
-
Fiberglass reinforced plastic Fiberglass pultruded grating FRP
Fiberglass pultruded grating is a type of grating made from fiberglass reinforced plastic (FRP) materials. It is manufactured through a pultrusion process, where fiberglass strands are pulled through a resin bath and then heated and shaped into profiles. Pultruded grating offers several advantages over traditional materials like steel, including corrosion resistance, lightweight properties, and high strength-to-weight ratio. It is commonly used in industrial and commercial applications where durability and safety are important considerations, such as walkways, platforms, and flooring in corrosive environments.
-
Fiberglass deck grating fiber glass reinforced plastic
Fiberglass grating, also known as FRP grating, is a composite material composed of glass fiber and resin matrix. This material has the advantages of corrosion resistance, light weight and easy installation. It is often used in environments such as sidewalks, platforms and stairs that require anti-slip and corrosion resistance.
-
Alkali-resistant Fiberglass Mesh AR Fiberglass Mesh C Fiberglass Mesh
Alkali Resistant (AR) Glass Fiber Mesh is a specialized type of reinforcing material used in construction, particularly in applications involving cement and concrete. This mesh is designed to resist degradation and loss of strength when exposed to alkaline environments, such as those found in cement-based products.
-
Fiberglass c channel fiberglass structure FRP structural
Fiberglass C channels are structural components made from fiberglass-reinforced plastic (FRP). They are widely used in various industries due to their high strength-to-weight ratio, corrosion resistance, and durability.
-
Vinyl Ester Resin Epoxy Resin MFE Resin 711
Vinyl ester resin is a type of resin produced by the esterification of an epoxy resin with an unsaturated monocarboxylic acid. The resulting product is then dissolved in a reactive solvent, such as styrene, to create a thermoset polymer. Vinyl ester resins are known for their excellent mechanical properties and high resistance to various chemicals and environmental conditions.
-
Fiberglass Insulation Rod Fiberglass Epoxy Rod
Fiberglass insulation rod:Fiberglass insulation rods are a type of thermal insulation material made from fine glass fibers. They are designed to provide thermal and acoustic insulation, and are typically used in various building and industrial applications.
-
Fiberglass Rebar FRP Rebar Epoxy Rebar Unsaturated Rebar
Fiberglass rebar, also known as FRP (Fiber Reinforced Polymer) rebar, is a type of reinforcement bar used in construction instead of traditional steel rebar. It’s made of high-strength glass fibers embedded in a polymer resin matrix.
-
Alkali Resistant Fiberglass Direct Roving C Glass Roving AR Roving
AR (alkali-resistant) roving,is also AR direct roving. is a type of reinforcement material used in the manufacturing of fiber-reinforced polymer (FRP) composites. These composites are widely utilized in various industries including automotive, aerospace, construction, and marine for their high strength-to-weight ratio and corrosion resistance.
AR direct roving is typically made of continuous strands of glass fibers, which are coated with a special sizing to enhance their compatibility with the resin matrix and improve adhesion between the fibers and the matrix. The “alkali-resistant” characteristic refers to the roving’s ability to withstand exposure to alkaline environments, which can degrade traditional E-glass fibers.
-
Fiberglass Woven Roving Combo Mat Fiberglass Mat Fiberglass Mat FRP Mat
Fiberglass woven roving combo mat is a type of composite material used in various applications, particularly in the manufacturing of fiberglass reinforced plastics (FRP). It’s constructed by combining layers of woven fiberglass roving with chopped fiberglass strands or matting.
The woven roving provides strength and structural integrity, while the chopped fibers enhance resin absorption and improve surface finish. This combination results in a versatile material suitable for a wide range of applications, including boat building, automotive parts, construction, and aerospace components.
-
Model Release Wax Composite Material Mold Release Wax
Mold release wax is a type of wax used in the manufacturing process to facilitate the easy release of molded objects from their molds. It’s applied to the surface of the mold before casting to prevent the molded material from sticking to the mold surface. Mold release wax forms a barrier between the mold and the casting material, ensuring smooth and effortless demolding without damaging the finished product.
-
Mold Release Wax Release Agent Fiberglass
Release wax, also known as mold release wax or demolding wax, is a type of wax used in various manufacturing processes, particularly in molding and casting. Its primary purpose is to create a barrier between the mold and the material being molded or cast, ensuring easy removal of the finished product from the mold without damaging either the mold or the product.
-
Fiberglass Grating Fiberglass Grid FRP grating
Fiberglass molded grating,also known as FRP (Fiber Reinforced Plastic) grating, is a type of grating made from fiberglass reinforced plastic materials. It consists of fiberglass strands or rovings combined with a thermosetting resin matrix, typically polyester, vinyl ester, or phenolic resin. The materials are combined and molded into panels or grids with various configurations, such as square or rectangular mesh patterns.
