page_banner

products

Featured Products

Chongqing Dujiang Composites Co., Ltd. A fibreglass manufacturer of chopped fiberglass mat、fiberglass roving、fiberglass mesh、fiberglass woven roving and so on. is one of good fiberglass material suppliers. We have a fiberglass factory located in Sichuan. Among the many excellent glass fiber manufacturers, there are only a few fiberglass roving manufacturers that are really doing well, CQDJ is one of them.We are not only fiber raw material supplier, but also supplier fiberglass.We have been doing fiberglass wholesale for more than 40 years.We are very familiar with fiberglass manufacturers and fibreglass suppliers all over China.

  • Self Adhesive Construction Drywall Joint Fibreglass Mesh Fibre Glass Tape

    Self Adhesive Construction Drywall Joint Fibreglass Mesh Fibre Glass Tape

    Fiberglass mesh tape is made of high-temperature and high-strength glass fiber, processed by a special process. It has the characteristics of high-temperature resistance, thermal insulation, insulation, fire retardant, corrosion resistance, aging resistance, weather resistance, high strength, and smooth appearance.

     

  • Good Quality E Glass Fiberglass Woven Roving Cloth 60G/M2 Fiberglass Fabric

    Good Quality E Glass Fiberglass Woven Roving Cloth 60G/M2 Fiberglass Fabric

    E-glass Fiber Woven Roving is in a variety of resin strengthen systems, and is one of the strongest textile fibers, having greater specific tensile strength than steel wire of the same diameter, at a lower weight.  widely used in the hand’s mechanical process and paste the shaping crafts of glass fiber reinforced plastic.

    MOQ:10 tons

  • 4400tex Panel Fiberglass Roving for Filament Winding Original Factory

    4400tex Panel Fiberglass Roving for Filament Winding Original Factory

    Assembled Panel Rovings 528S is a twist-free roving for the board, coated with silane-based wetting agent, compatible with unsaturated polyester resin (UP), and mainly used to make transparent board and the transparent board felt.

    MOQ:10 tons

  • ECR-Glass Fiberglass Surface Tissue Veil Mat Factory Price

    ECR-Glass Fiberglass Surface Tissue Veil Mat Factory Price

    Fiberglass surface mat:  The unique production process of fiberglass surface mat determines that the surface fiber has the characteristics of flatness, uniform dispersion, good hand feeling, and strong air permeability.
    The surface mat has the characteristics of fast resin infiltration. The surface mat is used in fiberglass reinforced plastic products, and its good air permeability enables the resin to penetrate quickly, completely eliminates bubbles and white stains, and its good moldability is suitable for any complex shape. , Can cover up the cloth texture, improve the surface finish and anti-leakage performance, at the same time enhance the interlaminar shear strength and surface roughness, and improve the corrosion resistance and weather resistance of the product is a necessity for manufacturing high-quality FRP molds and products. The product is suitable for FRP hand lay-up molding, winding molding, pultrusion profiles, continuous flat plates, vacuum adsorption molding, and other processes.

    MOQ:10 tons

  • Fiberglass Mesh Drywall Joint Paper Tape for Plasterboard

    Fiberglass Mesh Drywall Joint Paper Tape for Plasterboard

    Fiberglass mesh tape is made of high-temperature and high-strength glass fiber, processed by a special process. It has the characteristics of high-temperature resistance, thermal insulation, insulation, fire retardant, corrosion resistance, aging resistance, weather resistance, high strength, and smooth appearance.

     

  • EMC300-1040mm Fiberglass Chopped Strand Mat Factory made

    EMC300-1040mm Fiberglass Chopped Strand Mat Factory made

    E-Glass Chopped Strand Mat is made of Alkali-free Fiberglass Chopped Strands, which are randomly distributed and bonded together with a polyester binder in powder or emulsion form. The mats are compatible with unsaturated polyester, vinyl ester, and other various resins. It’s mainly used in hand lay-up, filament winding, and compression molding processes. The typical FRP products are panels, tanks, boats, pipes, cooling towers, automobile interior ceilings, a complete set of sanitary equipment, etc.

    MOQ:10 tons

  • Factory Price Fiberglass Woven Roving for Hand Lay up Ewr600-1250mm

    Factory Price Fiberglass Woven Roving for Hand Lay up Ewr600-1250mm

    E-glass Fiber Woven Roving is in a variety of resin strengthen systems, and is one of the strongest textile fibers, having greater specific tensile strength than steel wire of the same diameter, at a lower weight.  widely used in the hand’s mechanical process and paste the shaping crafts of glass fiber reinforced plastic.

    MOQ:10 tons

  • Fiberglass Chopped Strand Mat 600g/Sqm 450g/Sqm 300g/Sqm 225g/Sqm

    Fiberglass Chopped Strand Mat 600g/Sqm 450g/Sqm 300g/Sqm 225g/Sqm

    E-Glass Chopped Strand Mat is made of Alkali-free Fiberglass Chopped Strands, which are randomly distributed and bonded together with a polyester binder in powder or emulsion form. The mats are compatible with unsaturated polyester, vinyl ester, and other various resins. It’s mainly used in hand lay-up, filament winding, and compression molding processes. The typical FRP products are panels, tanks, boats, pipes, cooling towers, automobile interior ceilings, a complete set of sanitary equipment, etc.

    MOQ:10 tons

  • 160g Glass Fiber Fabric Mesh/ Fiber Plaster/ Fiberglass Mesh Net

    160g Glass Fiber Fabric Mesh/ Fiber Plaster/ Fiberglass Mesh Net

    Alkali Resistant Glass Fiber Mesh is woven of alkali-free or mild alkali fiberglass, then coated by alkali-resistant glue and treated with high-temperature heat finishing. It has alkaline resistance, flexibility, and high tensile strength, it always is used for thermal insulation, waterproofing, and crack resistance in the building field.

    MOQ:10 tons

  • Chinese Professional Glass Fiber Chopped Strand Mat for Hand Lay up Process

    Chinese Professional Glass Fiber Chopped Strand Mat for Hand Lay up Process

    E-Glass Chopped Strand Mat is made of Alkali-free Fiberglass Chopped Strands, which are randomly distributed and bonded together with a polyester binder in powder or emulsion form. The mats are compatible with unsaturated polyester, vinyl ester, and other various resins. It’s mainly used in hand lay-up, filament winding, and compression molding processes. The typical FRP products are panels, tanks, boats, pipes, cooling towers, automobile interior ceilings, a complete set of sanitary equipment, etc.

    MOQ:10 tons

  • 2400tex Fiberglass Spray up Roving for Swimming Pool

    2400tex Fiberglass Spray up Roving for Swimming Pool

    Assembled Roving for Spray-up is coated with a silane-based sizing, compatible with unsaturated polyester, vinyl ester, and polyurethane resins. 180 is a versatile general purpose spray-up roving used to manufacture boats, yachts, sanitary wares, swimming pools, automotive parts, and centrifugal casting pipes.

    MOQ:10 tons

  • Fiberglass Surface Mat Non-Woven Fabric Glass Fiber Mat

    Fiberglass Surface Mat Non-Woven Fabric Glass Fiber Mat

    Fiberglass surface mat:  The unique production process of fiberglass surface mat determines that the surface fiber has the characteristics of flatness, uniform dispersion, good hand feeling, and strong air permeability.
    The surface mat has the characteristics of fast resin infiltration. The surface mat is used in fiberglass reinforced plastic products, and its good air permeability enables the resin to penetrate quickly, completely eliminates bubbles and white stains, and its good moldability is suitable for any complex shape. , Can cover up the cloth texture, improve the surface finish and anti-leakage performance, at the same time enhance the interlaminar shear strength and surface roughness, and improve the corrosion resistance and weather resistance of the product is a necessity for manufacturing high-quality FRP molds and products. The product is suitable for FRP hand lay-up molding, winding molding, pultrusion profiles, continuous flat plates, vacuum adsorption molding, and other processes.

    MOQ:10 tons

Inquiry for Pricelist

For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

CLICK TO SUBMIT AN INQUIRY