Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
CLICK TO SUBMIT AN INQUIRY
Featured
Chongqing Dujiang Composites Co., Ltd. A fibreglass manufacturer of chopped fiberglass mat、fiberglass roving、fiberglass mesh、fiberglass woven roving and so on. is one of good fiberglass material suppliers. We have a fiberglass factory located in Sichuan. Among the many excellent glass fiber manufacturers, there are only a few fiberglass roving manufacturers that are really doing well, CQDJ is one of them.We are not only fiber raw material supplier, but also supplier fiberglass.We have been doing fiberglass wholesale for more than 40 years.We are very familiar with fiberglass manufacturers and fibreglass suppliers all over China.
-
Best quality Polyester Resin - Unsaturated Polyester Resin Manufacturers – Dujiang
PROPERTY •7937 resin polyester resin with medium reactivity •Moderate temperature peak, high strength, shrinkage, good toughness APPLICATION •It is suitable for solidifying quartz stone at room temperature and medium temperature.,ect QUALITY INDEX ITEM Range Unit Test Method Appearance Light yellow Acidity 15-21 mgKOH/g GB/T 2895-2008 Viscosity, cps 25℃ 0.65-0.75 Pa. s GB/T 2895-2008 Gel time, min 25℃ 4.5-9.5 min GB/T 2895-2008 Solid content, % ... -
Manufacturer of Fiberglass Composite Materials - Solid Fiberglass Rebar Frp Flexible – Dujiang
PROPERTY •High corrosion resistance:The fiberglass used by the rebar is a durable material, and they are molded through the composite process. The life span is up to 100 years. They can be used as permanent support materials. •A high tensile strength:The load is approximately double that of a steel bar with the same diameter •Low weight:The weight is only 1/4 that of a steel bar with the same diameter, therefore, the labor intensity is greatly reduced, and the transportation cost is reduced a... -
Super Lowest Price Fiberglass Mat Roll - Glass Fiber Panel Roving Assembled Fiberglass – Dujiang
528S is mainly used to make transparent sheets and transparent felt sheets. The board has the characteristics of lightweight material, high strength, good impact resistance, no white silk, and high light transmittance. Continuous Panel Molding Process resin mix is uniformly deposited in a controlled amount onto a moving film at aconstant speed. The thickness of the resin is controlled by the draw-knife. Fiberglass roving is chopped and uniformly distributed onto the resin. Then a top film is ... -
Special Design for 6 Oz Fiberglass Cloth - Fiberglass Surface Mat E-glass – Dujiang
PROPERTY •General Mat •High temperature resistance and anti-corrosion resistance •High tensile strength with good process ability •Good bond strength APPLICATION •Large size FRP products, with relatively big R angles: shipbuilding, water tower, storage tanks •panels, tanks, boats, pipes, cooling towers, automobile interior ceiling, complete set of sanitary equipment, etc Fiber Glass Surface Mat Quality Index Test Item Criterion According Unit Standard Test Result Resul... -
Special Design for Red Para Aramid Carbon Fiber Fabric - Carbon Fiber Fabric 6k 3k Custom – Dujiang
PROPERTY •The carbon fiber cloth of our company adopts imported carbon wire, which has bright and smooth surface, high straightness, no drum, fast dipping, and saves time and effort in construction. • Small thickness, easy to cross and overlap, can be bent and wound forming, suitable for reinforcement of various curved surfaces and special-shaped components. •Carbon fiber has high tensile strength, acid and alkali resistance, and corrosion resistance. • Non-toxic and non-irritating smell, con... -
OEM/ODM Manufacturer Gun Roving - Accelerator Cobalt Octoate for Unsaturated Polyester Resin – Dujiang
DESCTRIPTION • Appearance: clear purple liquid • Resin casting body color: original resin color APPLICATION •This promoter is normally used with our 191 resin, application dosage is 0.5%-2.5% • It is widely used in hand layup process FRP products, •For filament winding process FRP, and shower room base. QUALITY INDEX Ts max 30°C Ts min -10°C STORAGE •There will be a certain quantity loss after a period time of storage . The recommended highest storage temperature (Ts max) is... -
One of Hottest for Fiberglass Products - Smc Roving Assembled Fiberglass High Strength – Dujiang
Product Features ·Outstanding pigmentability and fiber whiteness ·Good anti-static property and choppability ·Providing fast and complete wet-out ·Excellent molding fluidity Specification Glass type E Sizing type Silane Typical filament diameter (um) 14 Typical linear density (tex) 2400 4800 Example ER14-4800-442 Technical Parameters Item Linear density variation Moisture content Sizing content Stiffness Unit % % % mm Test menthod ISO 1889 ISO 3344 ISO 1887 ISO 3375 Sta... -
Factory Cheap Hot Ecr 2400tex Fiberglass Roving - Fiberglass Surface Mat E-glass – Dujiang
PROPERTY •General Mat •High temperature resistance and anti-corrosion resistance •High tensile strength with good process ability •Good bond strength APPLICATION •Large size FRP products, with relatively big R angles: shipbuilding, water tower, storage tanks •panels, tanks, boats, pipes, cooling towers, automobile interior ceiling, complete set of sanitary equipment, etc Fiber Glass Surface Mat Quality Index Test Item Criterion According Unit Standard Test Result Resul... -
Hot Selling for Carbon Pregreg Cloth - Carbon Aramid Hybrid Kevlar Fabric Twill and Plain – Dujiang
PROPERTY •Light weight •High strength •Stable quality •Resistance high temperature •Colorful and various pattern design •Various carbon fiber yarn to meet your demand •Regular width is 1meter,1.5meters width can be customized APPLICATION •Fine decoration, sports equipment, auto parts, clocks and watches Hybrid carbon kevlar specification Type Reinforcement Yarn Weave Fiber Count(IOmm) Weight(g/m2) Width (cm) Thickness(mm) Warp Yarn Weft Yarn Warp Ends Weft Picks SAD3K-CAP5.5 T300-3... -
Factory Supply 300g E Fiberglass Mat - Direct Roving 4800tex For Filament Winding, Pultrusion, Weaving – Dujiang
PROPERTY • Excellent processing properties, low fuzz. • Multi-resin compatibility. • Fast and complete wet-out. • Good mechanical properties of finished parts. • Excellent chemical corrosion resistance. APPLICATION • 386T is suitable for use in pipes, pressure vessels, gratings and profiles,and the woven rovings converted from it is used in boats and chemical storage tanks. IDENTIFICATION Glass Type E6 Type of Size Silane Size Code 386T Linear Density (tex) 300 ... -
Wholesale Price Carbon Fiber Cloth Fabric - Colored Carbon fiber tube low density and light weight – Dujiang
PROPERTY •High tensile strength: The strength of carbon fiber is 6-12 times that of steel, and it can reach more than 3000mpa. •Low density and light weight. The density is less than 1/4 of steel. •Carbon fiber tube has the advantages of high strength, long life, corrosion resistance, light weight and low density. •Carbon fiber tube has the characteristics of light weight, solidity and high tensile strength, but special attention should be paid to electricity prevention when using it. •A seri... -
Good Wholesale Vendors Fiberglass Netting Mesh - E-Glass Fiberglass Woven Roving – Dujiang
PROPERTY • Warp and weft roving aligned in a parallel and flat manner, resulting in uniform tension. • Densely aligned fibers, resulting in high dimensional stability and making handing easy. • Good mold ability, fast and complete wet in resins, resulting in high productivity. • Good transparency and high strength of composite products • Good mold ability and drapability making handing easy. • Warp and weft roving aligned in a parallel and flat manner resulting in uniform tension and very lit...
