Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
CLICK TO SUBMIT AN INQUIRY
Featured
Chongqing Dujiang Composites Co., Ltd. A fibreglass manufacturer of chopped fiberglass mat、fiberglass roving、fiberglass mesh、fiberglass woven roving and so on. is one of good fiberglass material suppliers. We have a fiberglass factory located in Sichuan. Among the many excellent glass fiber manufacturers, there are only a few fiberglass roving manufacturers that are really doing well, CQDJ is one of them.We are not only fiber raw material supplier, but also supplier fiberglass.We have been doing fiberglass wholesale for more than 40 years.We are very familiar with fiberglass manufacturers and fibreglass suppliers all over China.
-
OEM Supply Hollow Carbon Fiber Rod - Colored Carbon fiber tube low density and light weight – Dujiang
PROPERTY •High tensile strength: The strength of carbon fiber is 6-12 times that of steel, and it can reach more than 3000mpa. •Low density and light weight. The density is less than 1/4 of steel. •Carbon fiber tube has the advantages of high strength, long life, corrosion resistance, light weight and low density. •Carbon fiber tube has the characteristics of light weight, solidity and high tensile strength, but special attention should be paid to electricity prevention when using it. •A seri... -
2022 Good Quality E-Glass Fiberglass Ecr Roving - Fiberglass Mesh Cloth Alkali-resistant Reinforcement – Dujiang
PROPERTY •Good chemical stability. Alkali resistance, acid resistance, water resistance, cement erosion and other chemical corrosion; And resin bond strong, soluble in styrene and so on. •High strength, high modulus and light weight. •Better dimension stability, hard, flat, not easy to contract deformation and positioning. •Good impact resistance. (due to its high strength and toughness) •Anti-mildew and insect repellence. •Fire, heat preservation, sound insulation and insulation INSTRUCTION ... -
New Arrival China Fiber Glass Mat - Solid Fiberglass Rebar Frp Flexible – Dujiang
PROPERTY •High corrosion resistance:The fiberglass used by the rebar is a durable material, and they are molded through the composite process. The life span is up to 100 years. They can be used as permanent support materials. •A high tensile strength:The load is approximately double that of a steel bar with the same diameter •Low weight:The weight is only 1/4 that of a steel bar with the same diameter, therefore, the labor intensity is greatly reduced, and the transportation cost is reduced a... -
China Cheap price Ecr Direct Roving - Accelerator Cobalt Octoate for Unsaturated Polyester Resin – Dujiang
DESCTRIPTION • Appearance: clear purple liquid • Resin casting body color: original resin color APPLICATION •This promoter is normally used with our 191 resin, application dosage is 0.5%-2.5% • It is widely used in hand layup process FRP products, •For filament winding process FRP, and shower room base. QUALITY INDEX Ts max 30°C Ts min -10°C STORAGE •There will be a certain quantity loss after a period time of storage . The recommended highest storage temperature (Ts max) is... -
OEM Supply Fiberglass Fabric - Fiberglass Mat E-Glass Chopped Strand Mat (Powder) – Dujiang
PROPERTY •General Mat •High temperature resistance and anti-corrosion resistance •High tensile strength with good process ability •Good bond strength 225g-1040 E-Glass Chopped Strand Mat Powder Quality Index Test Item Criterion According Unit Standard Test Result Result GLASS TYPE G/T 17470-2007 % R2O<0.8% 0.6% Up to standard COUPLING AGENT G/T 17470-2007 % SILANE SILANE Up to standard Area Weight GB/T 9914.3 g/m2 225±25 225.3... -
2022 High quality Epoxy Resin Manufacturers - MFE 770 Vinyl Ester Resin Bisphenol A Type Epoxy – Dujiang
Properties & Benefits •MFE 770 vinyl ester resin is an epoxy novolac-based resin designed to provide exceptional thermal and chemical resistance properties at higher temperatures. It offers a high resistance to solvents and chemicals, good retention of strength and toughness at elevated temperatures, and excellent resistance to acidic oxidizing environments. •FRP equipment produced using MFE 770 retains strength and toughness at elevated temperatures. •MFE 770 is the second generation of ... -
New Fashion Design for Buy Carbon Fiber - Carbon Aramid Hybrid Kevlar Fabric Twill and Plain – Dujiang
PROPERTY •Light weight •High strength •Stable quality •Resistance high temperature •Colorful and various pattern design •Various carbon fiber yarn to meet your demand •Regular width is 1meter,1.5meters width can be customized APPLICATION •Fine decoration, sports equipment, auto parts, clocks and watches Hybrid carbon kevlar specification Type Reinforcement Yarn Weave Fiber Count(IOmm) Weight(g/m2) Width (cm) Thickness(mm) Warp Yarn Weft Yarn Warp Ends Weft Picks SAD3K-CAP5.5 T300-3... -
China OEM Ptfe Fiberglass Mesh - Glass Fiber Panel Roving Assembled Fiberglass – Dujiang
528S is mainly used to make transparent sheets and transparent felt sheets. The board has the characteristics of lightweight material, high strength, good impact resistance, no white silk, and high light transmittance. Continuous Panel Molding Process resin mix is uniformly deposited in a controlled amount onto a moving film at aconstant speed. The thickness of the resin is controlled by the draw-knife. Fiberglass roving is chopped and uniformly distributed onto the resin. Then a top film is ... -
China OEM Marine Fiberglass Cloth - Alkali Resistant Fiberglass Roving Assembled 3200 tex – Dujiang
PROPERTY • Good wet-out in resins • Good dispersion • Good static control • Suitable for soft mats APPLICATION Unless otherwise specified, glass fiber products should be stored in a dry, cool and moisture-proof place. Glass fiber products should be kept in their original packaging before use. Room temperature and humidity should be kept at -10℃~35℃ and ≤80% respectively. To ensure safety and avoid damaging products, the stacking height of trays should not exceed three layers. When the trays a... -
Short Lead Time for Glass Fiber Woven Roving Mat - Fiberglass Mesh Tape Self Adhesive Drywall Joint – Dujiang
PROPERTY •Good Performance Of Alkaline-resistance; •High Tensile Strength And Deformation-resistance; •Excellent Self-adhesive Performance; •Simple And Easy Application. APPLICATION METHOD •Kept the wall clean and dry. •Attach tape in the cracks and compression. •Confirmed that gap has been covered tape, then use a knife to cut off it, at last brush on the plaster. •Let nature dry, then gently polish. •Fill enough paint to make it smooth. •Leaked tape removed. Then, pay attention to all crack... -
OEM/ODM Manufacturer Fiber Carbon Sheet - Carbon Fiber Sheet Plate 3k 8mm Activated 2mm – Dujiang
PROPERTY •Carbon fiber sheet has high tensile strength, corrosion resistance, shock resistance, impact resistance and other good properties •High-strength and high-efficiency •Light weight and good flexibility •The construction is convenient and the construction quality is easy to guarantee •Good durability and corrosion resistance APPLICATION •Reinforcement for bending and shearing of concrete beams, reinforcement for concrete floors, bridge slabs, reinforcement for concrete, brick masonry w... -
High reputation Pp Glass Fiber Composite Mat - Glass Fiber Panel Roving Assembled Fiberglass – Dujiang
528S is mainly used to make transparent sheets and transparent felt sheets. The board has the characteristics of lightweight material, high strength, good impact resistance, no white silk, and high light transmittance. Continuous Panel Molding Process resin mix is uniformly deposited in a controlled amount onto a moving film at aconstant speed. The thickness of the resin is controlled by the draw-knife. Fiberglass roving is chopped and uniformly distributed onto the resin. Then a top film is ...
