Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
CLICK TO SUBMIT AN INQUIRY
Massive Selection for 160gsm Twill Fiberglass Fabrics - Fiberglass Chopped Strands E-Glass Reinforcement for Concrete – Dujiang
Our commission is always to provide our customers and clientele with best quality and aggressive portable digital products for fiberglass woven roving cloth, Carbon Steel Sheets, Carbon fiber pipe, Our ultimate target is usually to rank as a top brand also to lead as a pioneer in our field. We are sure our profitable experience in tool generation will gain customer's trust, Wish to co-operate and co-create a far better foreseeable future with you!
Massive Selection for 160gsm Twill Fiberglass Fabrics - Fiberglass Chopped Strands E-Glass Reinforcement for Concrete – Dujiang Detail:
PROPERTY
•To prevent crack of GRC components
•Good Integrity and no static electricity
•Low Fuzz
•Excellent integrated with cement
•Good filament flexible and magnificent strands distribution cement
•Endued good physical and chemical properties for GRC
•Disperse Fast
•Low Dosages
•Harmless
Application
Applying for Fiberglass Reinforced Cement/Concrete
Usage Instruction:
(1)Pre-mixed Fiberglass Chopped Strand
Properties:
It has excellent properties with alkali resistance, stiffness, bundle–state, ageing–proof, Mixed 20 minutes in cement at 50rpm, it can still keep good bundle state, it won’t dispersed to filament.
Purpose:
It is a high integrity Glass Fiber Chopped Strands designed for use in the reinforcement of concrete, renders and mortars. It may be added to conventional
mixes either on site or by prepending with other dry mix components. The low – tex strands permits efficient reinforcement at low dosages. They are particularly suited to the modification of standard concrete mixes for floor screeds and slabs,and for the preparation of prebagged mixes of special mortars and renders.
(2) Water-dispersed Fiberglass Chopped Strands
Properties:
E-glass Glassfiber Applied with water–dispersed size, the strands will disperse well to filaments in water in 10 seconds, and also disperse fast, usage amount less, enlarge strength.
Purpose:
It is typically used at a low level of addition to prevent cracking and improve the performance of ready mix concrete, floor screeds, renders or the special mortar mixes.it can be used for surface crack–proof of GRC
products.
TO USE:
–Mix your resin and hardener, or catalyst
–Next add your Fiberglass Chopped Strands
–It is best to use a paint mixer on your power drill to ensure that all of the strands are properly saturated Thick layers and large pour areas can create excessive heat, so proceed with caution.
STORAGE
Fiberglass Chopped Strand should placed under dryness condition and shall no be open the covering membrane until applying
CAUTION
Dry powder materials can build up static charges, Proper precautions must be taken in the presence of flammable liquids
WARNING
Fiberglass Chopped Strand can cause eye irritation, harmful if inhaled, may cause skin irritation, harmful if swallowed.Avoid contact with eyes, and contact with skin, Wear goggles and face shield when handing. Always wear an approved respirator. Use only with adequate ventilation. Keep away from heat. Spark and flame. Store handle and use in a manner that minimizes dust generation
FIRST AID
In case of contact with skin, wash with warm water and soap. For eyes immediately flush with water for 15 minutes. If irritation continues seek medical attention. If inhaled, move to a fresh air environment. If you have breathing difficulties seek immediate medical attention
ATTENTION
Container may be hazardous when empty. Empty containers container product residue.
Key Technical Data:
| CS | Glass Type | Chopped Length(mm) | Diameter(um) | MOL(%) |
| CS3 | E-glass | 3 | 7-13 | 10-20±0.2 |
| CS4.5 | E-glass | 4.5 | 7-13 | 10-20±0.2 |
| CS6 | E-glass | 6 | 7-13 | 10-20±0.2 |
| CS9 | E-glass | 9 | 7-13 | 10-20±0.2 |
| CS12 | E-glass | 12 | 7-13 | 10-20±0.2 |
| CS25 | E-glass | 25 | 7-13 | 10-20±0.2 |
Product detail pictures:
Related Product Guide:
We goal to understand excellent disfigurement from the manufacturing and supply the top support to domestic and abroad clients wholeheartedly for Massive Selection for 160gsm Twill Fiberglass Fabrics - Fiberglass Chopped Strands E-Glass Reinforcement for Concrete – Dujiang , The product will supply to all over the world, such as: Portugal, Gambia, Czech Republic, Relying on superior quality and excellent post-sales, our products sell well in America, Europe, the Middle East and South Africa. We are also the appointed OEM factory for several worlds' famous products brands. Welcome to contact us for further negotiation and cooperation.
By Ingrid from Lyon - 2017.01.28 18:53
The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
By Caroline from Plymouth - 2018.08.12 12:27
-
Manufacturer for Self Adhesive Fibreglass Mesh ...
-
Low MOQ for Ecr Fiberglass Cloth - Fiberglass ...
-
100% Original Factory Carbon Fiber Twill Fabric...
-
Popular Design for Carbon Fiber Production Line...
-
China Supplier Fiberglass Vent Mesh - E-Glass ...
-
Fast delivery Honeycomb Carbon Fiber Fabric - ...
