Choosing the right fiberglass chopped strands depends largely on your end use, including the desired mechanical properties, heat resistance, chemical stability, and processing. Here are some factors to consider when selecting chopped strands:
Area of Application:
Reinforced Plastics: If used for reinforcing thermoplastic or thermoset plastics, select a glass fiber suitable for the processing temperature of that type of plastic.
Composite materials: when used in composite materials, different types and specifications of glass fibers should be selected according to the performance requirements of the composite materials.
Electrical insulation: Choosing glass fibers with good dielectric properties.
Fiber type:
E-glass fiber: is the most commonly used type of glass fiber, with good electrical insulation and mechanical properties.
S glass fiber: also known as high-strength glass fiber, with higher strength and modulus.
R glass fiber: better high temperature resistance, suitable for special high-temperature environments.
Fiber Length:
The length of chopped raw filaments usually ranges from 3mm to 25mm, depending on the performance requirements of the final product and processing technology.
Fiber diameter:
The diameter of the fiber affects the performance of the composite material, usually the smaller the diameter, the higher the strength of the composite material.
Surface treatment:
Glass fiber surface treatment (e.g. silane coupling agent treatment) can improve the bonding properties with the resin, thus enhancing the overall performance of the composite.
Alkali content:
Low-alkali glass fiber with less than 1% alkali content has better corrosion resistance and is suitable for special environments.
Supply Stability:
When choosing a supplier, consider its production capacity and supply stability to ensure production needs are met.
Cost:
Select cost-effective products according to your budget.
You can follow the steps below when making your selection:
Needs analysis: Define your specific application needs, including performance specifications, processing conditions, etc.
Market Research: Understand the glass fiber chopped raw material products in the market, including different brands, models, and their performance characteristics.
Sample testing: Request samples from suppliers and conduct lab tests to verify whether they meet your needs. We have a wide range of fiberglass chopped strands, and each model is sampled after production with a pass rate of 99.9%.
Cost Evaluation: Evaluate the cost-effectiveness of different products.
Supplier Evaluation: Evaluate the supplier’s production capacity, quality control, service, and other factors.
Combining the above factors, you can choose fiberglass chopped strands from our factory. When purchasing, it is recommended to fully communicate with us to ensure that the products can meet your specific requirements.
Contact Us:
Phone number/WhatsApp:+8615823184699
Email: marketing@frp-cqdj.com
Website: www.frp-cqdj.com
Post time: Nov-29-2024
