China OEM Supply Alkali-Resistant Fiberglass Mesh - Fiberglass Chopped Strands E-Glass Reinforcement for Concrete – Dujiang factory and manufacturers

OEM Supply Alkali-Resistant Fiberglass Mesh - Fiberglass Chopped Strands E-Glass Reinforcement for Concrete – Dujiang

short description:

Product Detail

Product Tags

Feedback (2)

We also present product or service sourcing and flight consolidation products and services. We have our possess manufacturing facility and sourcing place of work. We can easily supply you with almost every type of product or service connected to our item variety for Chopped Strand Mat Fiberglass, curing agent, Fiber Glass Chopped Strand Mat, Our group members are goal to provides merchandise with significant performance cost ratio to our consumers, as well as target for all of us is usually to satisfy our consumers from all around the environment.

OEM Supply Alkali-Resistant Fiberglass Mesh - Fiberglass Chopped Strands E-Glass Reinforcement for Concrete – Dujiang Detail:

PROPERTY

•To prevent crack of GRC components
•Good Integrity and no static electricity
•Low Fuzz
•Excellent integrated with cement
•Good filament flexible and magnificent strands distribution cement
•Endued good physical and chemical properties for GRC
•Disperse Fast
•Low Dosages
•Harmless

Application

Applying for Fiberglass Reinforced Cement/Concrete

Usage Instruction:

(1)Pre-mixed Fiberglass Chopped Strand

Properties:
It has excellent properties with alkali resistance, stiffness, bundle–state, ageing–proof, Mixed 20 minutes in cement at 50rpm, it can still keep good bundle state, it won’t dispersed to filament.

Purpose:

It is a high integrity Glass Fiber Chopped Strands designed for use in the reinforcement of concrete, renders and mortars. It may be added to conventional

mixes either on site or by prepending with other dry mix components. The low – tex strands permits efficient reinforcement at low dosages. They are particularly suited to the modification of standard concrete mixes for floor screeds and slabs,and for the preparation of prebagged mixes of special mortars and renders.

(2) Water-dispersed Fiberglass Chopped Strands

Properties:
E-glass Glassfiber Applied with water–dispersed size, the strands will disperse well to filaments in water in 10 seconds, and also disperse fast, usage amount less, enlarge strength.

Purpose:
It is typically used at a low level of addition to prevent cracking and improve the performance of ready mix concrete, floor screeds, renders or the special mortar mixes.it can be used for surface crack–proof of GRC
products.

TO USE:
–Mix your resin and hardener, or catalyst
–Next add your Fiberglass Chopped Strands
–It is best to use a paint mixer on your power drill to ensure that all of the strands are properly saturated Thick layers and large pour areas can create excessive heat, so proceed with caution.

STORAGE

Fiberglass Chopped Strand should placed under dryness condition and shall no be open the covering membrane until applying

CAUTION

Dry powder materials can build up static charges, Proper precautions must be taken in the presence of flammable liquids

WARNING

Fiberglass Chopped Strand can cause eye irritation, harmful if inhaled, may cause skin irritation, harmful if swallowed.Avoid contact with eyes, and contact with skin, Wear goggles and face shield when handing. Always wear an approved respirator. Use only with adequate ventilation. Keep away from heat. Spark and flame. Store handle and use in a manner that minimizes dust generation

FIRST AID

In case of contact with skin, wash with warm water and soap. For eyes immediately flush with water for 15 minutes. If irritation continues seek medical attention. If inhaled, move to a fresh air environment. If you have breathing difficulties seek immediate medical attention

ATTENTION

Container may be hazardous when empty. Empty containers container product residue.

Key Technical Data:

CS	Glass Type	Chopped Length(mm)	Diameter(um)	MOL(%)
CS3	E-glass	3	7-13	10-20±0.2
CS4.5	E-glass	4.5	7-13	10-20±0.2
CS6	E-glass	6	7-13	10-20±0.2
CS9	E-glass	9	7-13	10-20±0.2
CS12	E-glass	12	7-13	10-20±0.2
CS25	E-glass	25	7-13	10-20±0.2

chopped strands

Fiberglass chopped strands

Product detail pictures:

Related Product Guide:

With advanced technologies and facilities, strict quality control, reasonable price, superior service and close co-operation with customers, we are devoted to providing the best value for our customers for OEM Supply Alkali-Resistant Fiberglass Mesh - Fiberglass Chopped Strands E-Glass Reinforcement for Concrete – Dujiang , The product will supply to all over the world, such as: Jamaica, Bangalore, Cancun, Profession, Devoting are always fundamental to our mission. We have always been in line with serving customers, creating value management objectives and adhering to the sincerity, dedication, persistent management idea.

145 Gsm Fiberglass Mesh