Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
CLICK TO SUBMIT AN INQUIRY
Products
Chongqing Dujiang Composites Co., Ltd. A fibreglass manufacturer of chopped fiberglass mat、fiberglass roving、fiberglass mesh、fiberglass woven roving and so on. is one of good fiberglass material suppliers. We have a fiberglass factory located in Sichuan. Among the many excellent glass fiber manufacturers, there are only a few fiberglass roving manufacturers that are really doing well, CQDJ is one of them.We are not only fiber raw material supplier, but also supplier fiberglass.We have been doing fiberglass wholesale for more than 40 years.We are very familiar with fiberglass manufacturers and fibreglass suppliers all over China.
-
Polyester Fiberglass Mesh Fabric for Continuous Wound Pipes
The polyester fiberglass mesh fabric used in continuous pipe winding process is mainly based on unsaturated polyester resin. This resin is widely used in the continuous pipe winding process due to its high strength, high hardness and excellent corrosion resistance. Continuous pipe winding process is a highly efficient production method, which uses continuous output molds to wind materials such as resins, continuous fibers, short-cut fibers and quartz sand in a circular direction according to the design requirements, and cut them into pipe products of a certain length through curing. This process not only has high production efficiency, but also has stable product quality.
-
Fiberglass pultruded grating frp strongwell fibergrate
Fiberglass pultruded grating is a type of fiberglass grating that is made by pultruding, or pulling, fiberglass strands through a resin bath and then through a heated die to form the grating shape. This process results in a strong, lightweight, and corrosion-resistant material that is commonly used in industrial and commercial applications such as walkways, platforms, and other structural components where high strength and low maintenance are required. The pultruded design provides excellent load-bearing capabilities and resistance to chemical and environmental factors. Additionally, the non-conductive properties of fiberglass grating make it ideal for use in electrical and hazardous environments.
-
Fiberglass c channel grp structural shape
Fiberglass C channel is a structural component made from fiberglass-reinforced polymer (FRP) material, designed in the shape of a C for increased strength and load-bearing capabilities. The C channel is created through a pultrusion process, ensuring consistent dimensions and high-quality construction.
-
711 Vinyl Ester Resin frp epoxy high temp bisphenol-a
711 Vinyl Ester Resin is a premium standard Bisphenol-A type epoxy vinyl ester resin. It provides resistance to a wide range of acids, alkalis, bleaches and solvents used in many chemical processing industry applications.
-
Fiberglass Woven Roving Combo Mat
Woven Roving Combination Mat is a new type of fiberglass mat, it is made by Chopped strand mat and woven roving. The chopped strands layer is from 100g/㎡-900g/㎡, woven roving can be from 300g/㎡–1500g/㎡. It is suitable for Polyester resin, VinyI resin, Epoxy resin, and Phenolic resin. It is mainly used in the boat, car panel, automotive and structural sections.
-
Thermosetting Resin Curing Agent
Curing Agent is general purpose methyl ethyl ketone peroxide (MEKP) for the curing of unsaturated polyester resins in the presence of a cobalt accelerator at room and elevated temperatures, is developed for general purpose GRP- and non GRP-applications such as the curing of laminating resins and castings.
Practical experience throughout many years has proven that for marine applications a special MEKP with low water content and without polar compounds is demanded in order to prevent from osmosis and other problems. Curing Agent is the MEKP advised for this application. -
Fiberglass Mold Release Wax
Fiberglass Mold Release Wax to create a barrier film that provides multiple releases with ultra-high gloss finished parts.
-
Fiberglass molded grating suppliers frp grp walkway
Fiberglass molded grating is a plank-shaped material cured in the matrix of unsaturated resins including isophthalic, orthorphthalic, vinyl ester, and phenolic, with a reinforced frame of fiberglass roving through a special production process, with a certain rate of open meshes.
Structure Of CQDJ Molded Gratings
CQDJ Molded Gratings are woven with fiberglass roving and then cured in one piece in a whole mold.
1. Fully impregnation of resin with interwoven structure ensures great corrosion resistance.
2. The whole structure helps even distribution of load and contributes to the installation and mechanical properties of the supporting construction.
3. The lustrous surface and sliding surface help self-clean advantage.
4. The concave surface ensures a good anti-slippery function and the gritted surface is even much better.
-
Fiberglass Plant Stakes for Tree and Garden
The fiberglass stake is a type of stake or post that is made from fiberglass material. It is commonly used in various applications such as gardening, landscaping, construction, and agriculture. Fiberglass stakes are lightweight, durable, and resistant to weather and chemicals. They are often used to support plants, create fencing, mark boundaries, or provide structural support.
-
Fiberglass Tree Stakes for Plant Tomato and Garden
Fiberglass stakes are stakes or poles made of fiberglass material. It is commonly used in gardening, landscaping, and construction for a variety of purposes such as supporting plants, marking borders, and providing structural support. Fiberglass stakes are popular because they are lightweight, durable, and resistant to corrosion and rot, making them a versatile and long-lasting option for outdoor use.
-
Fiberglass Insulation Rod FRP Rod for Cable
Fiberglass insulation rod:High-strength insulating rod is a type of insulating composite material made of high-strength and high-modulus glass fiber reinforced epoxy resin and processed through a special process. It has the characteristics of light weight and compactness, long life and high strength, corrosion resistance, high temperature resistance, pollution resistance, and earthquake resistance. . The color, diameter and length of the product can be customized according to customer needs. It is currently widely used in electrical insulation fields such as high-voltage transmission, lightning arresters, and substations.
-
Fiberglass Tubing Suppliers Pultruded Rectangular Round Hollow Tube
Fiberglass tubes are tubular products made of fiberglass material with excellent mechanical properties, corrosion resistance, and electrical insulation properties. They are widely used in electric power, communications, construction, chemical industry, and other fields. Fiberglass tubes are typically made by impregnating fiberglass in resin and then shaping and curing it through a mold.
