Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
CLICK TO SUBMIT AN INQUIRY
Super Lowest Price Fiberglass Mesh Cloth - E-Glass Chopped Strand Mat Emulsion – Dujiang
We believe that long term partnership is a result of high quality, value added service, rich experience and personal contact for Frp Panel E-Glass Fiber Cloth, rebar fiberglass, Para Aramid Fabric Manufacturers, Winning customers' trust is the gold key to our success! If you are interested in our products, please feel free to visit our web site or contact us.
Super Lowest Price Fiberglass Mesh Cloth - E-Glass Chopped Strand Mat Emulsion – Dujiang Detail:
Applications and Requirements
1. Hand lay-up: Hand lay-up is the main method of FRP production. Fiberglass chopped strand mats, continuous mats, and stitched mats can all be used in hand lay-ups. The use of a stitch-bonded mat can reduce the number of layers and improve the efficiency of hand lay-up operations. However, because the stitch-bonded mat contains more chemical fiber stitchbonding threads, the bubbles are not easy to drive away, the fiberglass products have many needle-shaped bubbles, and the surface feels rough and not smooth. In addition, the stitched mat is a heavy fabric, and the mold coverage is shorter than that of the cut mat and the continuous mat. When making products with complex shapes, it is easy to form voids at the bend. The hand lay-up process requires the mat to have the characteristics of fast resin infiltration rate, easy elimination of air bubbles, and good mold coverage.
2. Pultrusion: The pultrusion process is one of the main uses of continuous felt and stitched mats. Generally, it is used in combination with untwisted roving. Using continuous mat and stitched mat as pultruded products can significantly improve the hoop and transverse strength of the products and prevent the products from cracking. The pultrusion process requires the mat to have uniform fiber distribution, high tensile strength, fast resin infiltration rate, good flexibility and mold filling, and the mat should have a certain continuous length.
3.RTM: Resin transfer molding (RTM) is a closed mold molding process. It is composed of two half-moulds, a female mold and a male mold, a pressurizing pump and an injection gun, without a press. The RTM process typically uses continuous and stitch-bonded mats rather than chopped strand mats. The mat sheet is required to have the characteristics that the mat sheet should be easily saturated with resin, good air permeability, good resin scour resistance and good overmoldability.
4.Winding process: chopped strand mats and continuous mats are generally used for winding and forming resin-rich layers mainly used for products, including inner lining layers and outer surface layers. The requirements for the glass fiber mat in the winding process are basically similar to those in the hand lay-up method.
5.Centrifugal casting molding: chopped strand mat is usually used as raw material. The chopped strand mat is pre-laid in the mold, and then the resin is added into the rotating open mold cavity, and the air bubbles are discharged by centrifugation to make the product dense. The mat sheet is required to have the characteristics of easy penetration and good air permeability.
Our fiberglass mats are of several types: fiberglass surface mats, fiberglass chopped strand mats, and continuous fiberglass mats. The chopped strand mat is divided into emulsion and powder glass fiber mats.
INSTRUCTION
|
E-Glass Chopped Strand Mat Emulsion |
|||||
|
Quality Index-1040 |
|||||
|
225G |
300G |
450G |
|||
|
Test Item |
Criterion According |
Unit |
Standard |
Standard |
Standard |
|
GLASS TYPE |
G/T 17470-2007 |
% |
R2O<0.8% |
R2O<0.8% |
R2O<0.8% |
|
COUPLING AGENT |
G/T 17470-2007 |
% |
SILANE |
SILANE |
SILANE |
|
Area Weight |
GB/T 9914.3 |
g/m2 |
225±45 |
300±60 |
450±90 |
|
Loi Content |
GB/T 9914.2 |
% |
1.5-12 |
1.5-8.5 |
1.5-8.5 |
|
Tension Strength CD |
GB/T 6006.2 |
N |
≥40 |
≥40 |
≥40 |
|
Tension Strength MD |
GB/T 6006.2 |
N |
≥40 |
≥40 |
≥40 |
|
Water Content |
GB/T 9914.1 |
% |
≤0.5 |
≤0.5 |
≤0.5 |
|
Permeation Rate |
G/T 17470 |
s |
<250 |
<250 |
<250 |
|
Width |
G/T 17470 |
mm |
±5 |
±5 |
±5 |
|
Bending strength |
G/T 17470 |
MPa |
Standard ≧123 |
Standard ≧123 |
Standard ≧123 |
|
Wet ≧103 |
Wet ≧103 |
Wet ≧103 |
|||
|
Test Condition |
|||||
|
Ambient Temperature（℃） |
10 |
Ambient Humidity(%) |
|||
We have many types of fiberglass roving: panel roving, spray up roving, SMC roving, direct roving,c glass roving, and fiberglass roving for chopping.
Product detail pictures:
Related Product Guide:
We thinks what clients think, the urgency of urgency to act from the interests of a client position of theory, allowing for greater quality, lessen processing costs, price ranges are much more reasonable, won the new and outdated shoppers the support and affirmation for Super Lowest Price Fiberglass Mesh Cloth - E-Glass Chopped Strand Mat Emulsion – Dujiang , The product will supply to all over the world, such as: Mali, Brunei, Bahrain, Our advanced equipment, excellent quality management, research and development ability make our price down. The price we offering may not be the lowest, but we guarantee it is absolutely competitive! Welcome to contact us immediately for future business relationship and mutual success!
By Albert from Tunisia - 2017.02.14 13:19
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Hedda from Latvia - 2018.07.27 12:26
-
2022 Good Quality Carbon Fiber Manufacturing -...
-
Best Price for 4*4mm Fiberglass Mesh - Fibergl...
-
Factory Cheap Wholesale Carbon Fiber Cloth - C...
-
Chinese Professional Pultrusion E Glass Roving ...
-
professional factory for Glass Woven Roving - ...
-
Professional Design Fiberglas Cloth - Accelera...
