page_banner

products

Supply OEM China 450g Emulsion/Powder Type Fiberglass Chopped Strand Mat EMC450

short description:

E-Glass Chopped Strand Mat is made of Alkali-free Fiberglass Chopped Strands, which are randomly distributed and bonded together with polyester binder in powder or emulsion form. The mats are compatible with unsaturated polyester, vinyl ester and other various resins. It’s mainly used in hand lay-up, filament winding and compression molding processes. The typical FRP products are panels, tanks, boats, pipes, cooling towers, automobile interior ceiling, complete set of sanitary equipment, etc.

MOQ:10 tons


Product Detail

Product Tags


Our products are broadly identified and trustworthy by people and may meet continually modifying financial and social requires of Supply OEM China 450g Emulsion/Powder Type Fiberglass Chopped Strand Mat EMC450, Presently, we’re wanting forward to even higher cooperation with abroad shoppers depending on mutual rewards. You should really feel totally free to make contact with us for more aspects.
Our products are broadly identified and trustworthy by people and may meet continually modifying financial and social requires of China Fiberglass Mat, E-Glass Strand Mat, We give good quality but unbeatable low price and the best service. Welcome to post your samples and color ring to us .We are going to produce the items according to your request. If you are interested in any solutions we provide, remember to feel free to contact us directly by mail, fax, telephone or internet. We have been here to answer your questions from Monday to Saturday and looking forward to cooperating with you.

Applications and Requirements

1.Hand lay-up: Hand lay-up is the main method of FRP production. Fiberglass chopped strand mats, continuous mats and stitched mats can all be used in hand lay-up. The use of stitch-bonded mat can reduce the number of layers and improve the efficiency of hand lay-up operations. However, because the stitchbonded mat contains more chemical fiber stitchbonding threads, the bubbles are not easy to drive away, and the fiberglass products have many needle-shaped bubbles, and the surface feels rough and not smooth. In addition, the stitched mat is a heavy fabric, and the mold coverage is shorter than that of the cut mat and the continuous mat. When making products with complex shapes, it is easy to form voids at the bend. The hand lay-up process requires the mat to have the characteristics of fast resin infiltration rate, easy elimination of air bubbles and good mold coverage.

2.Pultrusion: The pultrusion process is one of the main uses of continuous felt and stitched felt. Generally, it is used in combination with untwisted roving. Using continuous mat and stitched mat as pultruded products can significantly improve the hoop and transverse strength of the products and prevent the products from cracking. The pultrusion process requires the mat to have uniform fiber distribution, high tensile strength, fast resin infiltration rate, good flexibility and mold filling, and the mat should have a certain continuous length.

3.RTM: Resin transfer molding (RTM) is a closed mold molding process. It is composed of two half-moulds, a female mold and a male mold, a pressurizing pump and an injection gun, without a press. The RTM process typically uses continuous and stitch-bonded mats rather than chopped strand mats. The mat sheet is required to have the characteristics that the mat sheet should be easily saturated with resin, good air permeability, good resin scour resistance and good overmoldability.

4.Winding process: chopped strand mats and continuous mats are generally used for winding and forming resin-rich layers mainly used for products, including inner lining layers and outer surface layers. The requirements for the glass fiber mat in the winding process are basically similar to those in the hand lay-up method.

5.Centrifugal casting molding: chopped strand mat is usually used as raw material. The chopped strand mat is pre-laid in the mold, and then the resin is added into the rotating open mold cavity, and the air bubbles are discharged by centrifugation to make the product dense. The mat sheet is required to have the characteristics of easy penetration and good air permeability.

INSTRUCTION

E-Glass Chopped Strand Mat Emulsion

Quality Index-1040

225G

300G

450G

Test Item

Criterion According

Unit

Standard

Standard

Standard

GLASS TYPE

G/T 17470-2007

%

R2O<0.8%

R2O<0.8%

R2O<0.8%

COUPLING AGENT

G/T 17470-2007

%

SILANE

SILANE

SILANE

Area Weight

GB/T 9914.3

g/m2

225±45

300±60

450±90

Loi Content

GB/T 9914.2

%

1.5-12

1.5-8.5

1.5-8.5

Tension Strength CD

GB/T 6006.2

N

≥40

≥40

≥40

Tension Strength MD

GB/T 6006.2

N

≥40

≥40

≥40

Water Content

GB/T 9914.1

%

≤0.5

≤0.5

≤0.5

Permeation Rate

G/T 17470

s

<250

<250

<250

Width

G/T 17470

mm

±5

±5

±5

Bending strength

G/T 17470

MPa

Standard ≧123

Standard ≧123

Standard ≧123

Wet ≧103

Wet ≧103

Wet ≧103

Test Condition

Ambent Temperature

10

Ambient Humidity(%)

 

 

 

 

INSTRUCTIONOur products are broadly identified and trustworthy by people and may meet continually modifying financial and social requirements of Supply OEM China 450g Emulsion/Powder Type Fiberglass Chopped Strand Mat EMC450, Presently, we’re wanting forward to even higher cooperation with abroad shoppers depending on mutual rewards. You should really feel totally free to make contact with us for more aspects.
Supply OEM China Fiberglass Mat, E-Glass Strand Mat, We give good quality but unbeatable low price and the best service. Welcome to post your samples and color ring to us. We are going to produce the items according to your request. If you are interested in any solutions we provide, remember to feel free to contact us directly by mail, fax, telephone, or internet. We have been here to answer your questions from Monday to Saturday and look forward to cooperating with you.


  • Previous:
  • Next:

  • Inquiry for Pricelist

    For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

    CLICK TO SUBMIT AN INQUIRY